Chabros International Group is a leading producer and supplier of wood, veneer and a vast range of products and materials for interiors and exteriors in the Middle East.
MC France has modernised the whole production process with the inauguration of the new Cugand plant (department 85 – Vendée), which has a new SCM line for doors and window frames. This investment of over 3 million euro has resulted in excellent results in terms of highly flexible productivity and volumes.
Internorm is the European leader in the production of doors and windows and known internationally for its ability to offer innovative solutions to the most demanding customers. Since it began in 1931 the family run company is based in Traun, Upper Austria, has produced over 23 million doors and windows.
In today’s competitive global market, making your manufacturing process more efficient by implementing automation is an absolute necessity to stay competitive and successful. As companies incorporate high volume, complex, automated finishing lines, a key component to the successful operation is state-of-the-art control systems allowing for pre-programmed “recipe” selection and part tracking.
The Spanish Group produces high-quality plywood panels and has adopted an environmentally friendly policy based on the use of sustainable plantations. It recently installed in its Fuenmayor plant a new high-tech cell system for panel finishing equipped with Superfici and DMC solutions.
The day begins early, after a good coffee and a journey through the French region of the Charante. We are here to visit Joubert Plywood, a company specialised in producing poplar and okoume plywood.
The largest Italian furniture company maintains its masterly mix of advanced technology and craftsmanship. The innovations in the production process have led to the Moving Line, derived from lean manufacturing, which features a state of the art SCM cpc semiautomatic packaging line.
At Fratelli Minotti every design request and requirement is made possible thanks to the individual skills and SCM technology. The company, located in the heart of the Brianza, works as a subcontractor for the most important furniture factories.
Magic? Yes perhaps there is a pinch of magic: a piece of furniture that opens, a sofa disappears revealing a wall with shelves, containers, LED lights and a comfortable bed. All with a simple movement, no effort and a lot of style.
Håvar Tandstad, an industrial entrepreneur, has been using SCM Group machines exclusively for 16 years and was one of the first buyers of the Morbidelli Author M100: "This machine meets my needs for flexible production and for saving time and space."
The exemplary story of Andrey Mirlachov, a “self-made man” who has created a model company, employing 250 people, producing state of the art, high quality furniture. A man with very clear ideas: “In terms of technology I only want the best”, which naturally led him to SCM.
The company, set up in 1961, is currently the leader of the Russian furniture market. Since the nineties it had developed a strong partnership with SCM, that was further strengthened in 2013 with the installation of the important Splitter edgebanding line for panels.
In order to last, cooperation has to be built on solid foundations and requires constant, daily commitment. That is how the partnership between Belgian company DE WIN, specialised manufacturer of doors and windows, and Scm Group began.
“The search for a bright future” with an SCM Group maxi system for doors and windows. This is the meaning of “Wang Mei”, the name chosen for Wang Mei Wood Window, a company owned by China ITD Investment Co. Ltd., a true giant of the Chinese glazing industry.
SCM Group UK has commissioned the installation of a new Accord 25 FX CNC machining centre for Shepley – one of the UK’s leading fabricators of PVCu windows and composite doors.
We will be discussing timber-frame construction techniques. And in particular, cross-laminated timber as a potential construction material of the future?
A true Homo Faber, with his feet firmly planted in the tradition of one of the oldest world trades and his head turned towards the future taking full advantage of the social networks. A craftsman who produces one-of-a-kind creations using SCM Group machines exclusively.
There are beautiful objects, and there are useful objects. Some sophisticated dandy came up with the theory, intentionally provocative perhaps, that an object, in order to be considered truly beautiful must have no use whatsoever.
Interior Selections Furniture Factory LLC, a leading furniture factory operating in the UAE for over 23 years, were looking for a sanding/finishing solution when they approached the Scm Group, a leading global producer of woodworking machines and solutions.
Grandiose results are achieved when experts in their respective fields work together. In this case it’s the so called “white skin”, an interior panelling with unique characteristics used in the concert hall of the new Elbphilharmonie in Hamburg. It was created by the Hasenkopf industrial factory of Mehring with three SCM Group “Chronos” CNC machining centres with five axis.
If there is a “genius loci” an ugly object could never be produced by Ciam of Petrignano. The company is set in the green plain between Bastia Umbra and Petrignano. Looking up on one side there is the white Assisi towering at the feet of the Subasio, on the other side there is Perugia’s Acropolis.
The triumvirate of the title is not one of the infamous magistratures of ancient times but a contemporary group of individuals. We are talking about three capable entrepreneurs of Bingen (close to Sigmaringen), which share common interests, despite their different origins.
There is a classic mountain that is part of our collective imagination and a new surprising mountain made of technology, innovation and image. A new mountain that doesn’t forget the strong traditional values but interprets them in a new modern and global way.
In Nantes we visit a company specialised in fitting commercial vehicles. MDP has focussed in this sector with 6 SCM work centres, purchased between 2004 and 2016. “After training as a joiner, I was looking for an idea to fulfil myself”, explains Pascal Dabireau, company manager. “I therefore leased a part of my father’s plant to develop a range of products to fit commercial vehicles.
Dometic Group is a global company, providing solutions for” mobile living” within the areas Climate, Hygiene, Sanitary and Food&Drink. The mission is making mobile life simple. The company group who 2015 had a turnover of 11 billion SEK, have appr. 8 000 employees and production in 22 countries.
Alessandro Sforzi’s splendid decks are the exclusive finishing touch to the most beautiful boats in the world. His is a true entrepreneurial story made in Italy, born and pursued with passion and with an enduring relationship with SCM.
Right in the middle of the Black Forest Lignotrend produces high quality wooden construction components. The famous Goûter shelter, for example, was built at a nearly 4,000 metre altitude on Mont Blanc using the reliable materials provided by the German company.
How will your new home and your new furniture be built? They have been created with a new, and patented, process and materials which allows you to choose the ingredients through various ‘recipes’.
FAL, a leading producer of wood components, introduces on its production floor a new Routech Oikos machining centre. FAL, an acronym which stands for Fabbrica Avvolgibili Lavis (or 'rolling shutters factory of Lavis'), is located in Lavis, near Trento.
With a single machining centre boasting excellent performance, Melgari of Pescarolo (Cremona province) is still a match for a market that demands production of just a few items that have to be of top quality.
Traditional Sash Windows based in Guildford, Surrey, have been manufacturing, supplying and installing traditional sash and casement windows since 1999.
At Grampians Furniture (Halls Gap, Australia) a second chance... Halls Gap is an Australian town, the capital of the Grampians National Park. A lake, Lake Bellfield, a river, Fyans Creek, surrounded by a splendid natural environment.
18 employees, a turnover of around € 1.5 million and a very special recipe: it’s good for business if you’re the owner of the wood-working workshop, handle production and also sales.
Earth Elements has created a great design center for material and finish options along with a new modern cabinet shop to deliver cabinets, millwork and interiors to a wide-ranging clientele. The company is located in Southwest Montana near Bozeman, Montana.
A company that is intriguing not just due to its capabilities and the products it can make, but because it is a kind of “city of wood” where economic rules, attention to the territory and to young talent, sharing of values and memories all come together.
As Sir Richard Branson once said: “Always give it a try. And even if you fail, pick yourself up and try again". This is the philosophy that guides Nikita Semenov, vice-president and member of the Board of Topol Group, a Russian company that is now the leader on the children’s domestic furniture, offering a wide range of solutions and having significant production capabilities.
QM has recently purchased the new packaging line from CPC - a wellknown brand of Scm Group – to guarantee excellent productivity whilst minimising the operator’s interventions.
The company Lesplitinvest (in the Leningrad and Moscow oblast - autonomous region), is part of the SOUZ Industrial Holding Group and one of Russia’s leading MDF and interior door manufacturers. It recently purchased a second new CPC assembly and packaging line which allows high levels of productivity and minimum operator intervention.
Katiusha is a giant industrial group which manufactures furniture: originally a Soviet combine, today it is one of Russia’s leading furniture companies.
At BoConcept, a Danish retail furniture chain, they bring their focus to innovative and creative design and combine it with high quality in their products. That gives a challenge to their existing production facilities and that is why BoConcept invested in a new fully automated CNC-cell to meet the requirements and at the same time to develop an effective and flexible production.
From geothermal energy systems to curtain walls, from contracts to engineered flooring, from kitchens to taps and fittings, from bathroom furniture to sanitary fixtures, from ceramics to living room and bedroom furniture.
Tona Bathroom Furniture waits for no one when it comes to a purchase that will thrust it ahead of its peers. Like most astute businessmen, Frank Shen is not one to pass up a golden opportunity when he sees it. It took him a mere 30 minutes - from initial contact to final purchase - to say ‘yes’ to the Stefani Solution, a new edgebander offered by the SCM Group that can create ‘J’, ‘L’, and 45-degree-angle profiles.
A new plant of the Zhong Zhi Xin company is inaugurated in China, a first step in a great 4.6-million euro project. This confirms the Group's leadership position in the Chinese market, where in 2016 it has achieved a 20% growth compared to 2015.
The integration of a new deburring and satin finishing machine made by DMC, part of the SCM Group, means that Modena-based company Top Laser can supply “ready to use” stainless steel components without any need for additional operations.
Established in 1976 in Montecchio Emilia (Reggio Emilia province), Dil Plast supplies services for consulting, design and production of any type of moulds and parts for hermoforming.
Thanks to the choice of a new deburring and satin finishing machine from DMC, part of SCM Group, Bergamo-based Ambrosini G.T. is improving the quality of its products by making full use of the performance, reliability and the various operating options.
Since its start the company has produced over five million of doors and windows. Window Holding’s range includes products in aluminium, plastic, wood and a combination of materials, which can be used in numerous types of buildings, from private homes to complex public and commercial projects.
Turnkey companies, private individuals and also carpenters look to the Belgian company Gebrola of Bocholt. Managing Director, Martin De Laat, has invested in passion and know-how for more than thirty years.
It is always a pleasure to go back every few years to visit the Falegnameria Bussi company in Santa Sofia, near Forlì and Cesena in the Romagna region of Italy.
Kulmbach is the capital of the Bavarian district of the same name. Plassenburg castle, famous for containing the world’s largest collection of tin soldiers, dominates the woods and forests. It is in Frankenwald, the Franconian Forest, where wood is abundant.
At Vibrobloc, a company based in Montese, in the heart of the Apennines between Emilia and Tuscany, we met the company sales director, Claudio Leoni, to talk about the dynamic company dedicated to timber construction and the new Oikos cnc machining centre manufactured by Routech, a brand of Scm Group.
“Les Charpentier des Alpes et Provence” is a company specialised in the design, research, production, machining and assembly of laminated timber structures.
Established in Vendée in 1960 by Patrice and Annick Gautier, the Gautier company underwent a strong expansion in its early days and soon became a leader in the children’s furniture sector. Originality and quality are the marks of this brand.
Pantarei is one of the leading Italian panel processing companies that work for third parties. Meeting its owner, Domenico Londei, is like interviewing a "philosopher" in the field of furniture components: "The contractor," he says, "is at the forefront of technological research. Every day we meet with major technology producers, and out of this exchange with our partners, like SCM Group, technological progress is created".
For more than thirty years, the company Xylème has adopted an original approach to wood-working, a profession they have followed with passion and perseverance, achieving a full understanding of the machines, technologies and tools, which makes them better able to share them with their partners.
SCM Group’s specialists are always ready to respond with state of the art solutions to any technical requirement. This was the case with Celaschi and a Norwegian client.
True specialists, able to analyse the problem, come up with a solution and create the aggregate needed. The application sector is that of food technology, more precisely bottling plants.
Montracon are one of the leading manufacturers of top quality trailers in Europe supplying all types and the widest range of Box Vans, Curtainsiders, Flats, Double Deckers and Fridge trailers, from three manufacturing sites in Market Weighton and Doncaster, Yorkshire and in Mallusk, Northern Ireland.
Impressive. It doesn’t happen every day to see a production line churning out something like 1,200 sofas a day! With specific standards: quality to the smallest detail and safety. In partnership with Scm Group for over twenty years.