Compactness and simplicity of construction for a high performance multiblade.
Anti-kickback finger barriers
The SCM multiblade rip saw is equipped with 4 anti-kickback finger barriers: three top and one bottom and a chip deflector screen between the three top barriers.
Customisation for any requirement
Laser beam cuttin line reference. Some typical uses:
- extraction of irregular planks, without using fences
- selection of clear parts of planks with knots and fissures using rapid movement fence with single blade
Programmable turret fence
6 stop-turret programmable fence with pneumatic pedal positioning. It enables the sppedy reference movement when different cutting prorams are fitted on same shaft sleeve.
Extra saw blade shaft sleeve
With the possibility of having the blades always pre-set for repetitive cutting programs.
| Feed track width | mm | 300 |
| Maximum blade diameter | mm | 350 |
| Minimum cutting length | mm | 390 |
| Continuously adjustable feed track speed | m/min | 6-48 |
| Motors power | kW (HP) | 18,5/25,5/37 (25/35/50) |
Fill out the online form to be contacted by a salesperson
