Atl

Furniture Technologies

 

Masters of chic Italian comfort!

It doesn’t happen every day to see a production line churning out something like 1,400 sofas a day! All with a few precise rules: quality, to the smallest detail and safety. A partnership with SCM that has lasted for more than twenty years with one of the most recent purchases being a "gabbiani a2" angular panel saw and the "accord 40 nst" cell.

Franco Tartagni welcomed us with a broad smile: it is said that factories reflect those who set them up and manage them. In this case it is true. This is a large factory, over 45,000 square meters, where everything is organized, well-kept, even pleasant; a factory that seems to smile. Of course there are issues, things to improve and dozens of things to resolve, but the feeling is absolutely positive: it’s a nice place.

We are at the Faenza headquarters of Atl, a veritable giant in the production of upholstered furniture, with a turnover of 88 million Euro in 2019. He is one of the founding fathers of this company, with a long history marked by skills and passion, the desire to create something good for himself and for others and the will to reach further.

 

 

“... expression of our forty years of business”, tells us Tartagni satisfied. “In 1976 my partner Luciano Garoia and I decided to go it alone. We are in the heart of an area renowned for the production of upholstered furniture and we worked for a company that produced the polyurethane for the upholstery. In those years there was no shortage of work and it didn’t take a lot of courage, I must admit. We were very pleased that a few colleagues decided to take the plunge with us in this adventure and in the end there were eleven of us and two girls who were so young that they couldn’t even be partners. This was the beginning of our cooperative Cipes, with Garoia and I running it, which to this day, after many years and a lot of water under the bridge, is a pillar of the Atl Group, of which it holds 30%. The first year was terrible, also because someone feared that what we did could inspire others, throwing into disarray an entrepreneurial landscape that was very traditional. We held on, finding our first customers outside of the Forlì area, and things started going well; probably due to the fact that we understood before others, that the most important thing was service. The demand was strong and the factories had to concentrate on their work, outsourcing all the upstream machining operations to third party subcontractors. Over the years we learnt to do everything, to give our customers in white processed upholstery frames ready for being upholstered. We bought two woodworking workshops, today part of our new headquarters in Faenza, to construct upholstery frames, structures, etc. We grew quickly and little by little we started producing finished sofas, ready for the customer. This step led us, in 1997, to becoming suppliers of an important large scale retailer and, in 2002, of a chain of top of the range shops with a worldwide presence”.

 

Everything went splendidly: the group, thanks to start-ups and takeovers, grew stronger and developed its skills so that it could approach the market by offering everything, from design to the finished sofa for a living room or office. Important collaborations that opened new possibilities were consolidated:  from the residential to the contract, with the capacity to manage and produce for different market segments, from the more ordinary products to leather sofas with sophisticated shapes.

“In 2010 we came into contact with a well-known and consolidated Italian large scale retailer, with 200 retail outlets, which gave us an important challenge: producing one thousand sofas per day”.  

“I won’t go into details, but we bought from the multinational company Golden Lady the Omsa plant that they had decided to close and we turned it into the factory that you see today”, tells us Tartagni looking around. “We employed 150 of the people that they would have laid off. On 22 April 2012 we bought the building and in September we started producing with the new staff trained with our intensive courses, in a completely renovated building and a brand new plant. In a few months we achieved a miracle, without taking into account the earthquake that struck the Emilia area in those months and which brought many of the workshops that were working for us to their knees”.

In the 45,000 square metres of the Faenza factory they produce 1200 sofas a day: “I think it’s the largest plant for upholstered furniture operating in Italy today”, explains Tartagni. 500 of the group’s 600 employees work here, as well as at least another 300 subcontractors, for the production of sofas, cutting the polyurethane and in the woodworking workshop, that serves all the group’s production units.

The top of the range leather sofas are produced in the 10,000 square metre Bertinoro plant. 

But the new Faenza plant is truly impressive: “… it’s an extremely flexible plant, that allows us to do every day what we set out to do”, continues Tartagni. “If, for example, we have scheduled that today we must produce 1,125 sofas. By tonight 1,125 sofas will be loaded on the lorries. Bear in mind that every day we work on at least 60 different models and each model has twenty versions, which means that the 1,200 sofas that on average we produce every day are in 300 different versions in terms of shape, colour, size, number of seats and functions. Each shuttle of our plant is the bench where one of our sofas is constructed and assembled from the first wooden pieces for the structure, to the finished product. All according to a set schedule and a computerised management that warns each work station of which materials, mechanisms or materials they must prepare for the next sofa”.

But how does it all run so smoothly?

Thanks to the organization and the technology, even if producing a quality piece of upholstered furniture is a job that requires a high level of craftsmanship, where the human skills and touch  always make the difference. Especially in the final phase, in the upholstery, where the sofa or the armchair are dressed piece by piece and where the craftsmanship of the worker makes the difference: bear in mind that for each high quality leather piece of upholstered furniture that we build, at least seven or eight hours are required for the upholstery. And here there are no technologies or automatic processes, but just great skill and an immense passion for the job”.

Where does technology help you?

During the cutting phases, of the wood and the materials or the padding. Here we have perfected the procedures so that the preparation of the semi-finished pieces that our craftsmen will then assemble is as industrial as possible.

At the beginning of our work as joiners, when we purchased the two laboratories, that for us became of strategic importance, because they allowed us to manage the entire product chain, we had at our disposal only a few traditional and simple machines: band saws, some planers, a multi-blade, cutters and little else. Also in terms of safety, the latest technologies have allowed us to make some significant improvements. It was the desire to make certain phases of our process safer that brought us into contact with the SCM Group. It was 1988 and we discovered that they had a machine that suited us, allowing us to work in complete safety on wood and panels. We bought one immediately and it was the beginning of a very satisfactory relationship that lasts to the present day.

We grew with them, we learnt to know each other and find the most suitable solution. They installed our first panel saw and, recently, another angular system, two machines that allowed us to take a huge leap forward in terms of productivity and safety.

You see, if today we are capable of producing 1,400 sofas a day it’s because we have invested in people and technology. Applying precise organisational criteria, keeping up with the technological innovation has meant lowering production costs, streamlining our procedures, increasing our possibility of guaranteeing our customers what they ask. Always in utmost safety, which for us is paramount”.

A visit to the large woodworking workshop in Faenza reveals what Tartagni means. Stacks and stacks of pieces, wooden parts, ready to feed a non-stop production chain. About forty operators work in two shifts to prepare the strips and shaped parts that, joined together, will become the structure of a sofa or armchair.

 

“A well-made and sturdy wooden structure is not worth much, from an economical point of view, in relation to the final cost of a sofa. At Atl though we believe that a good structure is essential for a good sofa. It’s not worth cutting corners, so much so that we use first rate panels and wood, a philosophy that applies to all the raw materials that enter our plants. Producing large volumes, as I said earlier, requires no problems or interruptions in the process. It’s certainly not worth compromising the effectiveness of our assembly line for a poor quality panel or a piece of wood that suddenly breaks”.

Our collaboration with SCM

After purchasing three "gabbiani" beam saws from SCM, the Atl Group wanted to take a further step up the quality ladder in terms of high technology, by acquiring the brand new "gabbiani a2" angular panel saw, "I believe this SCM solution to be a small revolution in the world of sizing. We were looking for a technology that would provide us with maximum flexibility. The result far exceeded our expectations and we find ourselves with a cutting line that allows us to mass produce and on which we can work any material without any problem".

An extremely versatile, powerful machine that has changed the way we work at Atl Group: "In the past, we were often running behind. Now the production of a large part of our semi-manufactured goods can be handled without stress and for a hard-and-fast programming like ours, that is a huge advantage".

Indeed, the new "gabbiani a2" was designed to meet every kind of panel machining requirement, from mass production to "batch 1". With 95, 115 and 125 blade projection options, it offers maximum performance in terms of productivity and cutting quality, and this occurs thanks to the new functional units found in the range: from Saw set, for a fast, accurate automatic tool change, to Flexcut 1D that allows for complex cutting patterns in rapid times. The powered side aligner for fast positioning during the cutting process and the automatic panel labelling system before the cutting stage, that drastically reduces processing times, are key to increasing productivity.
 

Another important advantage our customers appreciate is the possibility for the machine to guarantee perfect cleanliness both inside the machine and the work environment. This is thanks to the Zero dust system, the innovative unit fitted with an automatic system that intervenes at each cut to contain thesaw dust and guarantee their complete extraction.

In the case of nesting processing of drums and internal structure of sofas, the Atl Group chose to replace the shaping machine supplied with a high performing automated cell: “accord 40 nst”. A technological project designed specifically to suit this customer, considering we are talking about a highly customisable cell. 

This solution also guarantees a high level of productivity, working several shifts, and stands out for its high level of automation. 

The cell can process three panels simultaneously thanks to the exclusive pusher at the machine entrance, that allows for up to three thick overlapping panels to be loaded, and the two groups of separate operators to work in parallel, each one equipped with a head to drill and high powered electrospindle. The loading system has two separate nailing units while the double conveyor at the exit is the machine's lifeline, considering the significant speed with which the machining is carried out. The operator should only be concerned with picking up the finished piece from the unloading station while the machine continues to work unattended in the intermediate stations.

Tartagni finishes off by saying: "There is another aspect of our relationship with SCM that I like to mention, and that is, the level of assistance. Our plants need to be reliable under any circumstances and this is why we chose technological partners capable of providing us with the best assistance".

Atl Group Spa (Italy)

Related products

gabbiani a2

The gabbiani a2 angular panel saw has been designed for a simple and automated production, which meets the needs also of small and medium companies. The wide range of integrated solutions with automatic loading/unloading allows to reach high production...

accord nst cnc machining centres

accord nst

A complete range of CNC machining centres integrated with automatic loading and unloading system for the control of the complete work cycle from a single operator. Optimal solutions to meet the specific needs of a flexible production with...

Automatic Single-Blade Beam Saw Gabbiani S - SCM Group

gabbiani s

Ideal solution for small-sized companies. Single-blade beam saw controlled by PC/PLC control system, designed to cut solid wood panels or panel stacks and its products (chipboards, MDF panels, multilayer panels, plywood panels and fiber panels). The...

Automatic Single-Blade Beam Saw Gabbiani GT 3 - SCM Group

gabbiani gt 3

New single blade beam saws offer high performance in quality for cut finishing and working speed in order to meet the production needs of the furniture companies. Ideal solution for the company that requires to process medium-large batches. gabbiani gt 3...

Single-Sided Automatic Edge Bander Olimpic K 560 - SCM Group

olimpic k 560

High performance and versatility: olimpic k 560 is designed for companies requiring to process many panels per day even though they may be different from one to another. olimpic k 560 has several solutions that guarantee always the best machining on...

Programmed Circular Saw Nova SI 400 - SCM Group

nova si 400

Programmed or manual circular saws with 400 mm blade. Guaranteed quality at your finger tips.