News

Additive Talk (Ep.5) - The materials
20 April 2022

Additive Talk (Ep.5) - The materials

The fifth episode in this series focuses the limelight on Professor Alessandro Pegoretti, Director of the department of industrial engineering at the University of Trento and Giacomo Barera, who is taking his industrial PhD at CMS as a materials expert.

Read more
Fasten your seatbelt for takeoff!
6 April 2022

Fasten your seatbelt for takeoff!

Inventing a machine is easy, building it is more complex, but making it work is everything.

Read more
Work on the cabin door of an aircraft: practical example
24 March 2022

Work on the cabin door of an aircraft: practical example

The structural frame part of the aircraft cabin door ​​​​​​​is a challenging piece to work on, in a sector like aerospace that requires inventive pieces with extreme precision. Perfection in the components can significantly influence cost reduction. The best possible combination between precision, speed, and reliability are needed to work on the cabin door in question. All this is done on a single CMS machine with ultrasound cutting, hole flaring, and piece trimming processings.

Read more
Additive Talk (Ep.4) - Roboze
16 March 2022

Additive Talk (Ep.4) - Roboze

In the fourth episode of the series, Giovanni Negri, CMS’s CEO meets Alessio Lorusso, CEO and Founder of Roboze, one of the most surprising organizations on the Additive Manufacturing panorama. The Italian company has managed to impose itself at global level thanks to the most accurate 3D print technology in the world, for super polymers and high-performance composite materials.

Read more
The First CMS Kreator for UK!
10 March 2022

The First CMS Kreator for UK!

CMS are delighted to announce we have entered a Partnership agreement with Pembrokeshire based United Aerospace Ltd (UA) which will result in the first CMS Kreator LFAM + Machine Centre being installed in the UK.

Read more
Additive Talk (Ep.3) - LinkedIn and the USA market
18 February 2022

Additive Talk (Ep.3) - LinkedIn and the USA market

Protagonist of the third episode is Paul Cesak, founder and owner of 3D Printing Today, one of the largest LinkedIn groups working in the field of additive manufacturing. The group has over 70,000 members from all over the world.

Read more
Composite materials in the automotive and racing world: a talk with HP Composites
31 January 2022

Composite materials in the automotive and racing world: a talk with HP Composites

A company with a flexible, resourceful nature. The passion for technology combined with the values of the racing world. A desire to accept the most interesting challenges offered by the market and the inclination to win them. It is with this philosophy that HP Composites, a company founded in 2010, has already become a world leader in the production of carbon fiber components for the motorsport and automotive industry.

Read more
Additive Talk (Ep.2) - M.D.C. DESIGN
9 December 2021

Additive Talk (Ep.2) - M.D.C. DESIGN

The second episode presents the point of view of one of CMS’s prestigious customer: M.D.C. DESIGN, a relatively young company that mainly deals with equipment to support the operator in controlling the size of all the parts that make up a vehicle.

Read more
Additive Talk (Ep.1) - The Challenge
2 December 2021

Additive Talk (Ep.1) - The Challenge

In this first episode we compare 2 technologies: the traditional removal one and the Large Format Additive Manufacturing one.

Read more
MECSPE 2021
2 December 2021

MECSPE 2021

Read more
UHF Tables: the 5 key concepts of the Universal Holding Fixture
26 November 2021

UHF Tables: the 5 key concepts of the Universal Holding Fixture

Universal Holding Fixture (UHF) is the universal system patented by CMS to automatically hold pieces and is capable of re-setting in a few seconds, to produce even the most complex shapes with each new piece. There are 5 concepts at the root of this technological revolution.

Read more
Formnext 2021
22 November 2021

Formnext 2021

Read more
EMO 2021
10 October 2021

EMO 2021

Read more
Welcome to the world of CMS Customer Service!
29 September 2021

Welcome to the world of CMS Customer Service!

Welcome to the world of CMS Customer Service! At your service, to satisfy your demands. With all of CMS’ expertise! Always and everywhere.

Read more
Let’s set off together on a journey into the future of the Automotive field
6 August 2021

Let’s set off together on a journey into the future of the Automotive field

A phenomenon never seen before, an epochal revolution. We provide advanced technologies and machine...

Read more
STADLER & CMS: “no time to relax!”
5 August 2021

STADLER & CMS: “no time to relax!”

Entering Stadler Minsk gives you the impression of crossing the threshold into a futuristic park....

Read more
Restomod 2021: a sustainable revolution for composite materials!
4 August 2021

Restomod 2021: a sustainable revolution for composite materials!

With CMS Kreator, in collaboration with Bercella srl, a leading company in the design and engineering of advanced solutions in composite materials, the molds for the car of the RestoMod 2021 project, sponsored by Tomaso Trussardi, have been produced.

Read more
Cms North America and Diversified Machine Systems: we have merged our diversity for a common goal, yours.
1 August 2021

Cms North America and Diversified Machine Systems: we have merged our diversity for a common goal, yours.

Starting January 1st, 2021, the merging sales’ staff of CMS North America and Diversified Machine...

Read more
Cms kreator: Making Additive Real
7 June 2021

Cms kreator: Making Additive Real

Large Format Additive Manufacturing and Milling by Cms! CMS kreator is a CMS machining center also...

Read more
MAKING ADDITIVE REAL
22 May 2021

MAKING ADDITIVE REAL

CMS, in cooperation with the prestigious Fraunhofer institute, develops an original LFAM solution, for improving the competitiveness of composite and other industries.

Read more
We never stop growing!
12 May 2021

We never stop growing!

Investments at Cms never stop: we have developed a new production area! The production center at...

Read more
The new ares: always a step forward!
30 March 2021

The new ares: always a step forward!

Integrated machining center for vertical routing, ideal for machining composite materials,...

Read more
Cms heading towards a sustainable future: the aerospace experience for the rail industry
19 January 2021

Cms heading towards a sustainable future: the aerospace experience for the rail industry

Sustainable mobility and the transportation industry play a crucial role in the quality of our...

Read more
CMS mbb for plate cutting: flexible solutions for maximum performance levels!
10 December 2020

CMS mbb for plate cutting: flexible solutions for maximum performance levels!

Flexible solutions and maximum performance levels to meet any kind of demand for machining aluminum...

Read more
CMS for the car industry: 41% lighter!
7 October 2020

CMS for the car industry: 41% lighter!

Machining centers for aluminium helping companies keep up-to-date in the car industry. The...

Read more
Technology and Productivity for the most exclusive supercars: CMS concept APC
23 September 2020

Technology and Productivity for the most exclusive supercars: CMS concept APC

Carbon fiber chassis are not always the best choice for supercar frames; there is a range of...

Read more
The essential solution for the production of electric cars: CMS ikon
10 September 2020

The essential solution for the production of electric cars: CMS ikon

The Car industry, nowadays, is turning its attention to electrics. Within this context, CMS...

Read more
CMS Live Show: an unprecedented success!
5 August 2020

CMS Live Show: an unprecedented success!

The event that took place on the 22nd and 23rd of July 2020 was a huge success for CMS Advanced...

Read more
avant caravan: the guarantee of travelling fast and free of inconvenience
10 July 2020

avant caravan: the guarantee of travelling fast and free of inconvenience

avant caravan has always been at the service of companies in the industry to guarantee maximum...

Read more
Honeycomb Cores Machining: the Winning Sinergy
8 June 2020

Honeycomb Cores Machining: the Winning Sinergy

The efficient machining of honeycomb is a challenge. It requires to get the best from two...

Read more