sergiani las

(512) 931-1962

Automatic continuous cycle press (patented) for the production of hollow core and coated (veneer, HPL, CPL) doors and pre-finished parquet (2-3 layers). The press sequentially loads one door at a time, maintaining constant pressure on doors inside other compartments. High productivity press up over 1200 doors per shift.

Advantages

High productivity:1 door each 20 second
Reduction of loading and unloading downtimes due to the continuous cycle and to fast pressing times by using “rapid glues” both water based and PUR; thus allowing immediate loading of the panel after composition without waiting times.

Better surface and gluing quality compared to a single compartment press with the same productivity, facilitated by the use of one press compartment for each door.

Reduction in occupied space compared to similar presses with simultaneous load.

Reduced maintenance and high reliability over time thanks to the electronic press movement and hydraulic circuit control and the presence of protective devices against incorrect loads.

Technical data

Model	Platens dimensions (mm)	Number of daylights	Total thrust (ton)
las s	2500 x 1300	5	120
las s	2500 x 1300	6	120
las s	2500 x 1300	10	120
las s	2800 x 1400	5	140
las s	2800 x 1400	6	140
las s	2800 x 1400	10	140
las p	2500 x 1300	5	200
las p	2500 x 1300	6	200
las p	2500 x 1300	10	200
las p	2800 x 1300	5	200
las p	2800 x 1300	6	200
las p	2800 x 1300	10	200
las 3	3350 x 1400	5	175
las 3	3350 x 1400	7	175

Media

Automatic pressing line for 3 layers flush doors

Full automatic laminating line

Doors line SP5 and Graphmatic

Automatic continuous cycle press

Documentation

sergiani_range_EN Download

Warning: catalogues download is disabled when browsing in incognito mode

Request information