Etablissements Béal

Furniture Technologies



Located in the Haute-Loire region in France, the Etablissements Béal company designs and manufactures specialist chopping boards for its predominantly professional clientele under its Chabret trademark that was originally deposited in 1885. Continuing a tradition firmly founded on quality the company’s two current directors have recently succeeded in optimising their production department with two work centres (one of them a five-axis machine) made in Italy by the SCM.



Chabret chopping boards take their name from René Chabret, the man who founded the business in 1885 in the municipality of SaintJust-Saint-Rambert (42) and began its long and unique history of expert craftsmanship in the sectors of made-to-measure furniture and end-grain chopping boards. In 1986, the business moved for the first time ever when it was taken over by the Henri Thessot company in Beauzac, and then, in 2007, when the Etablissements Thessot company was taken over by Etablissements Béal, it moved again to its new home in Saint-Bonnet-le-Château. “Naturally, since then, the product has changed slightly but not that much,” explains Cyprien Meynard, who now runs Etablissements Béal with his brother-in-law, Etienne Béal. “Having said that, we have also noted that professional butchers need to work rapidly and so they don’t always have time to look after the material they use. That’s why we insert threaded rods into the boards for this sector, as well as simply gluing them, even though the glue we use is normally more effective.”

Sometimes it’s quite amazing how things work out, and that is certainly true for Cyprien Me - ynard, who was a training engineer up until 2007 when he discovered this very special product: the chopping board! “A year be - fore we opened our business, I didn’t know a thing about chopping boards,” he admits.

But this lack of knowledge was rapidly righted, as shown by the fact that on 13th March 2009, Etablissements Béal was awarded the Entre - prises du Patrimoine Vivant (Living Heritage Companies) label – a trademark created by the French state to recognise and promote the de - velopment of companies who seek to maintain “an economic heritage that depends particu - larly on rare, renowned or ancestral know-how based on traditional techniques or fine tech - nical skills, typical of a certain area.”

These criteria certainly apply to Etablissements Béal, which sources its wood from two different saw - mills (one in Jura and the other in Doubs). The wood it uses is mainly hornbeam, as its quali - ties are particularly suited to making chopping boards. “Hornbeam is a very hard, very com - pact wood,” explains Cyprien Meynard, “that has an end-grain that is superior even to oak. It is easy to machine and looks better than beech, which is less dense.”

Manufacturing on demand. Etablissements Béal’s two partner sawmills cut the wood into planks and dry it to between 8 and 15%, when the board is destined for use on a butcher’s sales counter and between 18 and 20% if it has been ordered for the butcher’s workshop – the backroom where all the major cutting operations are carried out. Of all the Chabret trademark chopping boards produced, only about 10% of them are made for workshops. 

“Between 60 and 70% of our production is specifically made for a clientele of profession - als, whereas the rest is bought by private parties or shops,” specifies Cyprien Meynard. Nevertheless, Etablissements Béal, whose production organisation is based on a dynamic, or rather, local tradition also boasts nationwide visibility.

“We operate at a national level via dealers,” ex - plains Cyprien Meynard. “There are only three or four in France, but we have also had to face foreign competition from both Italy and Eastern Europe. These European manufacturers use mainly beech and some acacia. Our produc - tion, however, as well as being awarded the “Entreprises du Patrimoine Vivant” label, has also been certified with the NF Hygiène Ali - mentaire (Food Hygiene Standard) trademark and we are the only ones to have this certifica - tion.” This is important as hygiene is a factor that should not be forgotten in the chopping board sector, given that wood “absorbs up to 97% of bacteria, whereas plastic simply stores it,” explains Cyprien Meynard.

“On average, a professional butcher needs to change chop - ping board every 7 to 10 years.” It shouldn’t be forgotten either that in 2012, Etablissements Béal became a member of the “Ateliers d’Art 48 ETABLISSEMENTS BÉAL - FRANCE de France” (French Art Workshops).

Manufacturing chopping boards constitutes about 98% of the company’s activities. It also makes chopping boards in edge-grain beechwood or walnut, and part of this work is subcontracted. The company exports 4-5% of its production. “Up to 90% of our manufacture is made on demand and our production is essentially a just in time system,” specifies Cyprien Meynard. “We propose three basic models, but apart from that, it is important to establish a genuine interaction with the user by focusing on criteria, like the base, width or thickness of the board. Our role consists mainly in giving people an idea of what they want.”

Two complementary work centres. “When we started up the business, there were only three of us,” recalls Cyprien Meynard. “But in the years that followed we became increasingly well-known and at one point we even had thirteen employees. There is no escaping the fact, though, that thanks to the industrialisation of our production tools, turnover is now higher, even if there only ten of us. It’s difficult to find people who are really committed,” he adds. “We choose young workers who have experience as cabinet-making carpenters and we train them for between two and three years”. 

In 2010, Etablissements Béal bought its first SCM work centre, a 4-axis Record 100 model. “We hadn’t planned on opting for this type of investment a priori,” explains Cyprien Meynard, “but given the company’s growth, which is based above all on our know-how, we said to ourselves: why not?” The 4-axis Record 100 is a compact, hi-tech work centre fitted with a work table that allows double profiling tool machining, as well as reducing tool changeover times and significantly increasing productivity. It has quickly become a machine the company can’t do without,” notes Cyprien Meynard, “as nearly all the chopping boards pass through it. It is a machine that guarantees greater precision, less manual work and increased safety, so it also means we can think about investing in new markets.” In addition to the 4-axis Record 100, a year ago Etablissements Béal invested in a second SCM work centre: the 5-axis morbidelli m800 (pre-rebranding author m800). This faithful ally guarantees reduced maintenance, maximum versatility and an optimum quality finish.

 “With this large work centre we do everything we can’t do elsewhere, especially chopping boards with special shapes,” comments Cyprien Meynard. “Having a fifth axis is a significant advantage because it allows you to use less tools. Compared to a 4-axis work centre, there’s no need for an angular head, for example. Programming the machine is much simpler too.” Today the company operates with Maestro 3D software, a configuration that “allows us to plan work ahead and view machining processes as they are taking place.” In addition to these two work centres that the company’s production processes are now based around, the Etablissements Béal workshops also boast 4 side, planing, levelling and sanding machines, “even if,” specifies Cyprien Meynard, “most sanding operations are carried out by hand as the pieces are too heavy to load onto the machine”.

Text credits: Stéphane Jardin for Le Bois International Photo credits: Le Bois International and Etablissements Béal

Etablissements Beal

Request information

Fill out the online form to be contacted by a salesperson


Personal data processing pursuant to Legislative Decree 196/03 and GDPR 679/2016 and to the applicable legislation
GDPR* Authorisation
I hereby consent to my personal data being processed as per the Privacy Policy.

Marketing Authorisation
I hereby consent to my personal data being processed for marketing purposes as per the Privacy Policy.

Third-party authorisation
I hereby authorise the communication of my personal data to third parties, including companies in the group and/or external third parties outside the group, such as industry operators for their marketing purposes.

* In the absence of this authorisation, we will be unable to process your request.

Related products

Machining Center Morbidelli M600/800 - SCM Group

morbidelli m600/800

Modular machining center designed and developed to satisfy the requirements of furniture manufacturers. Performance without comparison with the mobile gantry structure and easy programming of all production process by means of Maestro CNC software.