News

Producing insulated glass units WAS a complex procedure in the past
16 September 2022

Producing insulated glass units WAS a complex procedure in the past

What are IG Units? A window fitted with insulated glass units is produced with two or more panels of glass separated by a vacuum space or filled with inert gas to reduce the transfer of heat from one side of the window to another. IG’s also provide improved acoustic insulation.

Read more
The power of exclusivity: BCE Glass Industry
5 July 2022

The power of exclusivity: BCE Glass Industry

Thanks to the new CMS maxima machining center and the advanced system developed by CMS created from a combination of three elements (specific 3d software, laser detection system of the models and new locking system for the glass with suction cups in different positions) BCE Glass Industry is the ideal partner to its demanding clients in the marine, automotive, aerospace and architectural world.

Read more
Find out how just one operator can oversee an entire cutting line
10 June 2022

Find out how just one operator can oversee an entire cutting line

A fully automated cutting line involves the glass sheets being picked up from racks, cutting them to size and lastly the break-out. Depending on the final sizes of the glass to be unloaded, the line can be overseen by a single operator. CMS’s runner line is available in two sizes: half Jumbo and Jumbo.

Read more
Connected machines are the present, not the future!
25 May 2022

Connected machines are the present, not the future!

Mistral Optical is a company producing, on average, 50,000 pairs of glasses a month. It is located in Quero Vas in the region of Belluno, global center for eyewear. Working on a pair of glasses is a complex operation that needs to find the perfect balance between expert manpower and automated work done by machines. There are about 30 intermediate stages. Knowing exactly at which stage a product can be found in the various processes, at any given time, is the turning point in the entire production chain; representing real added value in the service offered to one’s clients. Precisely with this in mind, the company decided to connect the numerous CMS machines together, from the latest additions to older versions.

Read more
The era of beveling with templates is coming to an end
6 May 2022

The era of beveling with templates is coming to an end

The template is impractical in terms of time but above all in terms of cost. All of this led CMS to study a unique and innovative (patented) alternative: the NTS (No Template System) It is a component attached to the processing head of the machining center that eliminates the need for templates. Adopting this solution brings with it considerable savings: up to 33% in time and up to 41% in material used

Read more
What CAN’T we do for you?
9 March 2022

What CAN’T we do for you?

Flat glass is great material to use for interior furnishings. Using monolithic or laminated glass, a myriad of different products can be produced. Stair rails, stair treads, elevators, flooring, walls, doors, kitchen counters, cooktops, sinks, tables, mirrors, shower enclosures, shelves, and dressers just to name a few. There are a number of processes that take place to take the glass from raw material to a finished product. In the world of interior design, what CAN’T we do for you? Sandblasting, lithography, superficial treatments, tempering, and lamination. All the rest, we can.

Read more
2022: United Nations’ International Year of Glass
7 February 2022

2022: United Nations’ International Year of Glass

Glass dominating the stage in 2022.

Read more
Worry-free work!
24 January 2022

Worry-free work!

The new CMS ypsos software, the CNC vertical machining center for processing glass, has been designed to maximize the efficiency of numeric control and make the user interface a unique experience.

Read more
High productivity in compact spaces!
7 December 2021

High productivity in compact spaces!

One of the most efficient and highly productive ways to process glass sheets is the use of vertical machining centers.

Read more
Vitrum 2021
12 October 2021

Vitrum 2021

Read more
Welcome to the world of CMS Customer Service!
29 September 2021

Welcome to the world of CMS Customer Service!

Welcome to the world of CMS Customer Service! At your service, to satisfy your demands. With all of CMS’ expertise! Always and everywhere.

Read more
Let’s get to know GFP Meccanica better, the new addition to the CMS family:
22 September 2021

Let’s get to know GFP Meccanica better, the new addition to the CMS family:

A few months ago, CMS announced its takeover of the company, GFP Meccanica, an important...

Read more
5 reasons why CMS ypsos is a unique machine on the market!
22 September 2021

5 reasons why CMS ypsos is a unique machine on the market!

50 years of experience in the industry and the desire to achieve the highest reliability ever in...

Read more
Do you process safety glass? CMS smartline is the ideal solution for you!
14 July 2021

Do you process safety glass? CMS smartline is the ideal solution for you!

Cutting thick safety glass without compromising on cycle times can be quite a challenge, especially...

Read more
Processing glass? Even simpler and more intuitive!
7 June 2021

Processing glass? Even simpler and more intuitive!

Latest news: working glass has never been so instant! Our machines are constantly undergoing...

Read more
We never stop growing!
12 May 2021

We never stop growing!

Investments at Cms never stop: we have developed a new production area! The production center at...

Read more
CMS acquires GFP
29 April 2021

CMS acquires GFP

Important reinforcement of CMS in glass processing machine tools sector....

Read more
Cms gea: endless glass machining capabilities with just one machine
23 February 2021

Cms gea: endless glass machining capabilities with just one machine

According to Greek mythology, Gea is the Earth, mother of all divinities symbolizing the natural...

Read more
Cms Glass Technology Live Show: THANK YOU!
10 December 2020

Cms Glass Technology Live Show: THANK YOU!

This unique event of its kind proved a resounding success with its audience spread across the...

Read more
CMS Smart Production Manager: the ideal software for your vertical glass processing line
10 December 2020

CMS Smart Production Manager: the ideal software for your vertical glass processing line

The CMS Glass Technology line up of vertical CNC machinery is the ideal solution for creating...

Read more
The ideal solution for processing curved glass: CMS maxima
23 September 2020

The ideal solution for processing curved glass: CMS maxima

The Nautical industry is continually evolving with yachts requiring more and more complex shapes....

Read more
The finest quality of grinding ever: speed & maxima
10 September 2020

The finest quality of grinding ever: speed & maxima

Glass is an excellent furnishing element that adds elegance to its surroundings and accentuates...

Read more
The benchmark for machining large pieces of glass: profile
9 July 2020

The benchmark for machining large pieces of glass: profile

Urban environments are undergoing drastic changes. The limited space available is being exploited...

Read more
The highly flexible line for the refrigeration industry: combined profile and vertec mill line
23 June 2020

The highly flexible line for the refrigeration industry: combined profile and vertec mill line

CMS’s definitive solution for the complete manufacturing of refrigerated display cases.  ...

Read more
CMS restarts with production and operations in full compliance with anti-Covid regulations
30 April 2020

CMS restarts with production and operations in full compliance with anti-Covid regulations

A restart that allows us to continue to provide maximum support to our customers and partners, as we have done in recent weeks and will continue to do, by enhancing digital tools and services for training, after-sales assistance and remote demos.

Read more
CMS Vertec Mill: the unique vertical cnc machining center able to machine thickness up to 30 mm
27 April 2020

CMS Vertec Mill: the unique vertical cnc machining center able to machine thickness up to 30 mm

Vertec Mill is designed for high productivity purposes due to the possibility of drilling...

Read more
CMS is always at your side
20 April 2020

CMS is always at your side

Standing by our customers and partners, even from afar, with all our best-in-class machines, our...

Read more
CMS is always by your side
6 March 2020

CMS is always by your side

In the light of the latest international developments and news related to Coronavirus...

Read more
CMS International Open House - Glass, Stone, Metal technologies
28 February 2020

CMS International Open House - Glass, Stone, Metal technologies

An innovative Technology Center means a lot for us, for example having a place in which all...

Read more
New Technology Center available in Zogno headquarter!
21 February 2020

New Technology Center available in Zogno headquarter!

A 1.000 square meters technological development center with special, state-of-the-art machinery to...

Read more