Windorflex is the SCM machining cell for windows and doors manufacturing.
It is an innovative and high-tech solution designed to perform all the necessary operations for producing window frames, regardless of the type.
The automatic work-pieces loading/unloading systems enable the machine to work autonomously, without the continuous input of the operator. These systems are available in two solutions: with loading/unloading bench or with an anthropomorphous robot.
The automatic worktable, available in single or double version, is equipped with dedicated clamps for the constant holding of the work-pieces. It is possible to process from 1 to 4 work-pieces in sequence.
The configurability of the machining units with 4 and 5-axis electrospindles, allows performing all the necessary operations for windows production.
THE ROBOT THAT WORKS FOR YOU!
Unmanned machining: the system is equipped with an anthropomorphous robot that picks up the rough elements and unloads the finished work-pieces on special trolleys.
|windorflex 1||windorflex 2|
|Max. work-piece length||mm||1 x 3500
2 x 1700
1 x 4500
3 x 1245
1 x 6000
4 x 1160
|2 x 3500
4 x 1700
2 x 4500
6 x 1245
2 x 6000
8 x 1160
|Min. work-piece length||mm||220
160, with specific cycle
|Max. work-piece width||mm||260|
|Min. work-piece width||mm||40|
|Max. work-piece thickness||mm||160|
|Min. work-piece thickness||mm||35|
|X-Y-Z axes max. speed||m/min||100-80-50|
|Standard electrospindles motor power||kW||20|
|Standard tools stores||n. - positions||1 x 48||2 x 48|
Fill out the online form to be contacted by a salesperson