SELECURE - UVM1 PLUS
(512) 931-1962
The ordinary ultraviolet sources produce a string infrared radiation that may cause a relevant overheating of the irradiated substrates. Thanks to a refined device developed by Superfici, it is possible to filter the emitted radiation taking away most of the infrared portion. The result is a cold ultraviolet light which can be used with any kind of thermo-sensitive material. The above mentioned Coldcure system combined with the development of a special UV-PLUS module achieves the possibility of positioning the reflector in three different positions: 1. Direct irradiation – on the surface to be cured. 2. Coldcure position – to achieve a “cold” polymerisation. 3. Stand-by position – in case of conveyor stop with lamp power supply cut to 50%.
- versatility of the modular system - high focal yield of the reflector mod. Labes, developed by Superfici to achieve a high concentration of the UV rays together with a wide versatility in the applications.- possibility to work in Coldcure mode for a “cold” polymerisation - possibility of stepless adjustment of the UV lamp power. - excellent reliability of the power supply. - Wide range of available modules.
| UV MODULE SELECURE UVM1 PLUS | |
| available lamp length |
from 300 to 2300 mm. |
| adjustable lamp power |
from 40 to 120 W/cm |
| cooling type |
air |
| power supply type |
electronic |
| functioning mode |
direct - cold - stand by |
Fill out the online form to be contacted by a salesperson