The cost-effective combined machine ideal for woodworking workshops, however able to ensure the typical performances of the professional machines in its compact dimensions.
Fully equipped
The planer unit has a cutter block with 2 re-usable knives (the “Tersa” disposable knives system with 3 knives and rapid clamping is available as an option). Genius machines also have saw-planer fences with an anodized aluminum extrusion and a support with clamp for fast positioning.
Practical and ergonomic
To keep the machine compact and make machining easier, the surfacing table opens towards the inside of the machine. Thanks to an efficient feed system, the thicknessing unit can process wood up to 200 mm thick.
„Xylent“ Spiralmesserwelle mit 3 Messerreihen
Die 3 Spiralmesser sorgen für ein hervorragendes Finish. Der reduzierte Geräuschpegel während der Bearbeitung sorgt für ein angenehmeres Arbeitsumfeld. Außerdem wird die Staubabsaugung verbessert, da sehr kleine Späne entstehen. Jedes Messer hat 4 Schneidspitzen, die bei Verschleiß in die Schneidposition gedreht werden können, was die Lebensdauer des Messerblocks verlängert, bevor die Messer ausgetauscht werden müssen.
| fs 30g | ||
| Working width | mm | 300 |
| Cutterblock diameter / no. of standard knives | mm / no. | 62/2 |
| Dimension of standard knives | mm | 300 x 25 x 3 |
| Max. stock removal | mm | 3 |
| Surfacing tables total length | mm | 1200 |
| Thicknessing table dimensions | mm | 300 x 450 |
| Feed speed on thicknesser | m/min | 6 |
| Min. ÷ max. workign height on thicknesser | mm | 3 ÷ 200 |
| Three-phase motors starting from | kW / Hz | 1,8 (2,2) / 50 (60) |
Fill out the online form to be contacted by a salesperson
