balestrini pico md
(512) 931-1962
Çift çalışma tablalı CNC zıvana açma makinesi Masif ahşap veya melamin kaplı MDF'den çerçeve ve dolap kapaklarının üretimi için “Gönye Kapı” bağlantılarının, dübel gerektirmeden montaj ile uygulanmasına yöneliktir. Birkaç kurulum aşaması ve yeni İnsan-Makine Arayüzü Maestro aktif bağlantısı, yüksek üretkenlik ile birden fazla partinin üretilmesini sağlar.
POWER AND ERGONOMICS
The 4.5 kW tenoning unit and the 2 kW mortising unit make it possible to produce tenons and mortises with a reduced number of passes. The tenoning and mortising depth is adjusted in the parking area, which is also used for tool maintenance.
SAFETY AND CLEANLINESS
The full enclosure of the machine ensures protection without reducing its ease-of-use, and keeps the outside environment clean.
The side suction outlets allow to convey shavings and dust towards the extraction system.
| MACHINING FEATURES | ||
|
Workpiece cross-section (widthxthickness) |
||
| Min. | 38 x 18 mm | |
| Max. with 45° cut | 102 x 28 mm | |
| Max. with 0° cut | 150 x 28 mm | |
| Workpiece length | Min. | 100 mm |
| Max. | Not applicable | |
| Tenon dimensions | Length max. | 150 mm |
| Thickness max. | 12,7 mm (1/2") | |
| Height | 8 ÷ 26 mm | |
| Hole or mortise dimensions | Hole diameter | 3 ÷ 16 mm (up to 26 mm by interpolation) |
| Mortise length max. | 150 mm | |
| Mortise thickness | 3 ÷ 16 mm (up to 26 mm by interpolation) | |
| Hole or mortise depth max. | 12,7 mm (1/2") | |
| "Miter Door" work cycle time min. | 18s (50 frames for cabinet doors/hour) | |
Request information
Fill out the online form to be contacted by a salesperson
Thank you Your message has been sent.
generic-error-title generic-error-message