Window Holding

Технологии для окон и дверей

 

Window Holding a.s., the Czech Republic’s largest producer of windows, has achieved a leadership position through the merger of the Country’s three leading manufacturers and thanks to its company philosophy focusing on customer satisfaction.

Since its start the company has produced over five million of doors and windows. Window Holding’s range includes products in aluminium, plastic, wood and a combination of materials, which can be used in numerous types of buildings, from private homes to complex public and commercial projects.

Today Window Holding boasts five production units located across the Czech Republic, with almost one thousand employees. Its products are sold through three important brands: Vekra, with over 70 single-brand shops across the Country, providing a complete range of products and services; Otherm, specialised in the production of plastic and aluminium windows; Tww (Top Wood Windows), for wood and wood/aluminium windows and custom solutions.

 

“Thanks to the versatility of the SCM solutions, we have been able to significantly increase the production of different products: front doors, sliding doors and arc windows.”Vojtěch  Mařak, member of Supervisory Board

In order to guarantee the maximum quality of its products, the company has decided to follow all the machining stages in-house: components manufacturing, sanding, painting, assembly and installation of the glass.

The use of technologically advanced machines, whilst still keeping particular attention to manual work, is the key aspect that allows the company to not only meet the increasing demands of the market, but also guarantee superior product quality and a high level of customisation.

This approach has seen the SCM Group used by Window Holding take centre stage. Between 2005 and 2007 the company has purchased the CNC working centre Windor 40 and the integrated line Windor 100, which have ensured the achievement of high productivity and flexibility targets, necessary to produce different types of windows, such as the “Castel Window”, designed for renovated historical buildings, therefore respectful of the exterior aesthetics with all the specifications of a modern product.

The company has recently purchased two Accord 40 fx CNC machining centres, fitted with state of the art technology: MATIC automatic work table equipped with hold-down clamps of 145 mm in height, Prisma KT 5-axis machining head complete of BRC unit for accessorial machining operations. Both machines are controlled by a specialized supervisor software with online data output directly in the machining centre.

“We chose SCM Technology based on our excellent experience with the Windor 40 and Windor 100 solutions, which we have used for many years. We appreciate the brand’s high degree of specialisation, the technologically advanced solutions and their reliable and prompt after sales support, which is for us fundamental in a supplier.

Thanks to the versatility of the SCM solutions, we have been able to significantly increase the production of different products: front doors, sliding doors and arc windows. As a result,we have also achieved an almost unlimited degree of flexibility in the production of highly customized solutions”. - Vojtěch Mařak, member of Supervisory Board.

Window Holding (Czech Republic)

The Window Holding a. s. company exports the windows and doors into several EU countries 

www.windowholding.eu

Форма запроса

Пожалуйста, заполните форму запроса, и мы свяжемся с Вами в ближайшее время

Маркетинговое разрешение
Настоящим я даю согласие на обработку моих персональных данных в маркетинговых целях в соответствии с Политикой конфиденциальности.

Сторонняя авторизация
Настоящим я разрешаю передачу моих персональных данных третьим лицам, включая компании, входящие в группу, и/или внешние третьи стороны, не входящие в группу, например, отраслевым операторам, для их маркетинговых целей.

* В отсутствие этого разрешения мы не сможем обработать ваш запрос.

Похожая продукция

Обрабатывающие центры для Пластика ЧПУ Accord 40 FX-M - Группа SCM

accord 40 fxm

Обрабатывающий центр, оснащенный высокопроизводительным мультифункциональным алюминиевым рабочим столом SCM, для еще большей гибкости производства без каких-либо ограничений по форме, что требует наличия высоко стандарта точности.

System интегрированные оконные линии - Группа SCM

system

"System" - это высокотехнологическое техническое решение для производства оконных блоков, соединяющее в себе высокую гибкость и максимальный...