Angular machining centre for doors and windows frame manufacturing.
It is possible to perform all of the essential operations of end-cutting, tenoning, drilling-routing and profiling regardless of construction concept, joint and section type.
The machine structure is completely enclosed in order to reduce noise to a minimum and ensure maximum safety for the operator.
TENONING WITHOUT COMPARISON
Automatic tenoning cycle to reduce unproductive times and risks for the operator to a minimum due to the rotary movement of the presser: it is possible to process, in sequence, the two sides of the work piece in a completely automatic way.
THE FOREFRONT AT YOUR FINGER TIPS
Great variety in terms of number of tools thanks to the interchangeables spindles with HSK taper: easy use, fast machine set-up, high performances in finishing quality.
"OPTIMA 1" UNIT
The machine can be fitted with a drilling-routing unit for all complementary machining when tenoning: the work-piece exits ready to be assembled and workpiece does not have to be finished in subsequent stages on other machines.
|Min. - max. work-piece length||mm||200 - 3000 (200 - 3800 opt.)|
|Min. - max. work-piece width||mm||40 - 200|
|Min. - max. work-piece thickness||mm||40 - 140|
|Maximum tenon angle||± 60°|
|Feed speed of tenoning carriage||m/min||0 ÷ 12|
|Feed speed in profiling||m/min||6 (4 ÷ 10 opt.)|
|Worktable height in tenoning||mm||990|
|Worktable height in profiling||mm||870|
Preencha este formulário para receber mais informações