balestrini pico md

(512) 931-1962
Pennenbanken, langgatboren en dubbelzijdige profileermachines - Pennenbanken, langgatboren en dubbelzijdige profileermachines - balestrini pico md

CNC Tenoning-mortising machine with double worktable 

Dedicated to the execution of “Miter Door” joints for the production of frames and cabinet doors in solid wood or melamine-coated MDF, with assembly with no need of dowels.

The few set-up phases and the new Human-Machine Interface Maestro active joint allow to produce several batches with high productivity.



The 4.5 kW tenoning unit and the 2 kW mortising unit make it possible to produce tenons and mortises with a reduced number of passes. The tenoning and mortising depth is adjusted in the parking area, which is also used for tool maintenance.


Up to 50 frames per hour with the Infinity work cycle that uses the interpolation of the two NC axes to execute pendulum machining without interruption, depending on the presence of the workpiece on the worktable. 

Its particular path allows to avoid any chipping of the workpieces.


The full enclosure of the machine ensures protection without reducing its ease-of-use, and keeps the outside environment clean.

The side suction outlets allow to convey shavings and dust towards the extraction system.


It is the new Human-Machine Interface with an extremely simple and effective design, which allows to select numerous macros for Miter Door joint, tenons, holes and mortises programming.


Workpiece cross-section (widthxthickness)

Min. 38 x 18 mm
Max. with 45° cut 102 x 28 mm
Max. with 0° cut 150 x 28 mm 
Workpiece length Min. 100 mm
Max. Not applicable
Tenon dimensions Length max. 150 mm
Thickness max. 12,7 mm (1/2")
Height 8 ÷ 26 mm
Hole or mortise dimensions Hole diameter 3 ÷ 16 mm (up to 26 mm by interpolation)
Mortise length max. 150 mm
Mortise thickness 3 ÷ 16 mm (up to 26 mm by interpolation)
Hole or mortise depth max. 12,7 mm (1/2")
"Miter Door" work cycle time min. 18s (50 frames for cabinet doors/hour)


Informatie aanvragen

Vul het online formulier in om contact op te nemen met een productadviseur


Privacy beleid – Door gebruik te maken van het contact formulier gaat u akkoord met ons privacy beleid. Hierin staat onder meer vermeld dat wij uw gegevens uitsluitend voor intern gebruik zullen gebruiken en/of voor een goede verwerking van uw bestellingen.