balestrini pico om
(512) 931-1962
CNC Zıvana-zıvana açma iki yüzlü makine Ayaklar, traversler ve sandalye sırtları gibi masa ve sandalyeler için masif ahşap elemanların uygulanmasına yöneliktir. Eşsiz tasarımı sayesinde, makine, kavisli elemanların üstten boyuna işlenmesine kolayca geçiş yapmak için her zaman kullanıma hazır iki çalışma masasına sahiptir.
| MACHINING FEATURES FOR FRONT WORKTABLES | ||
| Workpiece cross-section (widthxthickness) | With straight cut min. | 10 x 10 mm |
| With straight cut max. | 200 x 60 mm | |
| Workpiece length | Min. | 100 mm |
| Max. | 880 mm | |
| Tenon dimensions | Horizontal length max. | 200 mm |
| Thickness max. | 30 mm | |
| Height | 8 ÷ 50 mm | |
| Tenon inclination | 0° ÷ 90° | |
| Productivity max. | 720 tenons/hour | |
| Hole or mortise dimensions | Hole diameter max. | 16 mm (doubling by interpolation) |
| Mortise length max. | 140 mm | |
| Mortise thickness | 0 ÷ 16 mm (doubling by interpolation) | |
| Hole or mortise depth max. | 30 mm for pieces to be cut off 50 mm for cut off pieces |
|
| MACHINING FEATURES FOR REAR WORKTABLE | ||
| Worpiece cross-section (widthxthickness) | Min. | 15 x 15 mm |
| Max. | 100 x 60 mm | |
| Loadable workpiece length | Min. with 2 JIG FREE COMPACT | 180 mm |
| Max. | 1350 mm | |
| Machinable workpiece length | Min. with 2 JIG FREE COMPACT | 180 mm |
| Max. | 1100 mm | |
| Hole or mortise dimensions | Hole diameter max. | 16 mm (doubling by interpolation) |
| Mortise length max. | 1100 mm | |
| Mortise thickness max. | 16 mm (doubling by interpolation) | |
| Hole or mortise depth max. | 50 mm | |
Request information
Fill out the online form to be contacted by a salesperson
Thank you Your message has been sent.
generic-error-title generic-error-message