tecnocut jetpower evo

(512) 931-1962
Complete waterjet systems - Pressure intensifiers - tecnocut jetpower evo

High pressure intensifier

CMS brought about a new concept in ultrahigh pressure intensifiers, enhaced by technological solutions designed to satisfy the needs of most demanding users. This new technology is based on an intensifier equipped with several pressure multipliers independent, parallel and electronically synchronized. This innovative solution results in an everconstant pressure avoiding any drops typical of traditional opposecylinder intensifiers.

  • highly constant pressure and no accumulator
  • higher stability of the dynamic pressure signal as a guarantee to achieve a superior quality cut
  • lower wear of all machining centre high-pressure circuit components, longer life of materials and reduced maintenance
  • the technology of independent cylinders allows shutdown of any cylinder that needs servicing
  • this means the operator can choose the maintenance schedule, without stop the machine
  • software-based electronic control of cutting pressure
  • electronic monitoring of temperature, pressure and filter clogging
  • hydraulic pump with variable flow rates
  • hydraulic cylinders return circuit with independent pump
  • air/Oil exchanger for hydraulic circuit cooling (water/oil option)
  • it can be connected to any Stand Alone cutting system
Advantages

CONSTANT OUTPUT PRESSURE FOR BETTER CUTTING QUALITY

Hydraulic intensifier with 2 or 3 independent and electronically syncronized parallel cylinders to guarantee a constant signal of output pressure without the use of attenuator.

REDUNDANT ARCHITECTURE: LESS MACHINE DOWNTIME

The technology with 3 independent cylinders allows the bypass of a single cylinder that needs maintenance, while the machine is working, avoiding unnecessary downtime.

LESS MAINTENANCE COSTS

The parallel cylinders architecture is designed for a low cycle frequency that reduce the high pressure components wear and consequently the maintenance costs.

REDUCTION OF OIL CONSUMPTION AND OPERATING COSTS

Water flow rate up to 5 l/min to satisfy a wide range of cutting applications, adapting the oil consumption thanks to an independent variable flow pump for hydraulic circuit.

Technical data
TECNICAL DATA
  Tecnocut Jetpower evo 30 Hp Tecnocut Jetpower evo 60 Hp
POWER 22,5 kW / 30 Hp 45 kW / 60 Hp
MULTIPLIER 2 3
MAX WATER PRESSURE 4150 bar / 60.000 psi 4150 bar / 60.000 psi
MAX WATER PRESSURE 2,5 lpm / 0,66 gpm 5 lpm / 1,32 gpm
MAX DIAMETER ORIFICES 0,28 mm / 0,011 in 0,40 mm / 0,016 in
VOLTAGE 400V +/- 5% 50-60 Hz (Different voltages and frequencies on request)
Documentation
Request information

Fill out the online form to be contacted by a salesperson

 

Personal data processing pursuant to Legislative Decree 196/03 and GDPR 679/2016 and to the applicable legislation
GDPR* Authorisation
I hereby consent to my personal data being processed as per the Privacy Policy.

Marketing Authorisation
I hereby consent to my personal data being processed for marketing purposes as per the Privacy Policy.

Third-party authorisation
I hereby authorise the communication of my personal data to third parties, including companies in the group and/or external third parties outside the group, such as industry operators for their marketing purposes.

* In the absence of this authorisation, we will be unable to process your request.