Tenoning-mortising machine with two CNC head units dedicated to the execution of tenon-mortise joints at 45° Miter door for the production of frames and cabinet doors. The machine adjustments are controlled by numerical control. Thanks to the NC machine adjustments and the automatic hopper feeder this tenoning-mortising machine achieves unparalleled productivity. The new Human-Machine Interface Maestro active joint allows macros programming and sending into the machine easily.
CNC POSITIONING OF HEAD UNITS
The left and right head units, composed of a tenoning unit and a tenoning/mortising unit respectively, and the automatic feeder are moved to work position by NC.
LOADING STATION WITH AUTOMATIC HOPPER FEEDER
At the machine front side, it is placed a loading station equipped with an automatic hopper feeder that allows to execute loading/unloading operation in masked time.
SAFETY AND ERGONOMICS
The full protection enclosure with manual opening/closing doors and photocells ensures complete safety during the working phases and maximum ergonomics when entering the machine for set-up and maintenance.
|Workpiece cross-section||Width x thickness||
min. 38 x 20 mm
max. 75 x 25 mm
|Workpiece length||With cross-section min. 38x20, measured on the long side||
min. 178 mm
max. 1950 mm
|With cross-section max. 75x25, measured on the long side||
min. 102 mm
max. 1870 mm
|Tenon dimensions||Horizontal tenon length max.||80 mm|
|Thickness max.||30 mm|
|Height max.||50 mm|
|Hole or mortise dimensions||Hole diameter max.||24 mm|
|Mortise length max.||80 mm|
|Mortise thickness max.||24 mm|
|Hole or mortise depth max.||50 mm|
|CNC Automatic feeder||Workpiece length min/max.||100/2000 mm|
|Loadable weigth on the loading station max.||20 kg|
|Mortising unit||Power||2,2 kW|
|Tool diameter std.||10 mm or 3/8”|
|Programming||With macros, through Maestro active joint|
Vul het online formulier in om contact op te nemen met een productadviseur