balestrini cube
(512) 931-1962
balestrini cube’s operating heads work as two independent 5-axis machining centres, performing a wide range of operations on the work piece in a very short time. The innovative machine structure, equipped with independent strokes, allows both working units to process the work piece at the same time, without overlapping or limitations.
TWO MACHINING CENTERS IN ONE
Two multi-function operating heads perform machining/ handling of the work piece and the positioning of the worktables.
SYNCHRONIZATION OF THE OPERATING HEADS
The movements of the two operating heads are synchronized by NC to allow them to overlap during work piece machining.
WORKING UNIT X34
Working unit revolver with 4 outlets and 3 electrospindles (no. 1 x 9,5 kW, no. 2 x 4 kW).
WORK PIECE LOCKING EQUIPMENT
JIG FREE worktables with automatic positioning and carried in X,Y and Z.
| AXES | X-Y-Z axes speed | 80 – 80 – 80 m/min |
| AXES STROKES UPPER WORKING UNIT | X Y Z C A |
4100 mm |
| AXES STROKES REAR WORKING UNIT | U V W D B |
3600 mm |
| WORKTABLE STROKES |
P |
1920 mm |
|
WORKING UNITS: ELECTROSPINDLES 24000 RPM - LIQUID COOLING |
X34 at 5 axes with tool change |
No 1x9,5 kW + No. 2x4 kW No. 1x12 kW |
| MAXIMUM WORKABLE VOLUME LAVORABILE | On one single worktable With the two paired worktables |
300 x 300 x 1500 mm 300 x 300 x 3000 mm |
| OPTIONS | Double loader Throughfeed loader Single or double handling device |
Remplissez le formulaire pour recevoir de plus amples informations
Remplissez le formulaire pour recevoir de plus amples informations