CNC milling, tenoning, mortising machine for kitchen furniture doors and furniture fronts. The balestrini pico md3 machine is specifically designed to cut a special 45° or 90° joint ideal for furniture door frames, table tops, front frames of chest of drawers, etc. It is equipped with two working units moving on two interpolated axes. One units cuts ends and tenons, while the other unit makes holes or slots.
Maximum productivity (with Miter Doors cycle): up to 200 tenons and 200 mortises in 1 h, 1 frame in 72 sec.
Reduced time of set-up, machine suitable for small batches, programs selectable in just a few seconds.
Pendulum machining on the left-hand and right-hand of the worktable.
MITER DOORS JOINTS
Execution of joints at 45°, Miter Doors type, programmable by macro. Pre-set paths to avoid splintering on solid wood profiled elements or tear-out on coated MDF.
Execution of joints at 90°, French Joint type, programmable by CAD CAM T-CAS Entry pre-installed on the machine.
|Workable piece dimensions|
|Width x thickness with cut at 45°||110x70 mm|
|Width x thickness with cut at 0°||155x70 mm|
|Min. workpiece length||100 mm|
|Max. tenon length||0÷150 mm|
|Tenon thickness max||0 - 20 mm|
|Tenon depth||5 - 15 mm|
|Mortise length||0÷150 mm|
|Mortise thickness||0÷16 mm (double with interpolation)|
|Mortise depth||0÷30 mm|
|Maximum Productivity||Minimum time cycle to execute a tenon and a mortise 18 sec.|
Llena el formulario para ser contactado