CNC dual head tenoning machine for the simultaneous execution of round and straight tenons at the workpiece end, with different angles. It is possible to equip the head units with 2 drilling/mortising units. Thanks to the NC machine adjustments and the automatic hopper feeder this tenoning-mortising machine achieves unparalleled productivity. The new Human-Machine Interface Maestro active joint allows macros programming and sending into the machine easily.
CNC POSITIONING OF HEAD UNITS
The right and left head units, composed of a tenoning unit and, as an option, a drilling/mortising unit, can be positioned by NC at various angles, allowing the execution of machining operations even at negative angle.
LOADING STATION WITH AUTOMATIC HOPPER FEEDER
At the machine front side, it is placed a loading station equipped with an automatic hopper feeder that guarantees a loading and unloading time of less than 3".
SAFETY AND ERGONOMICS
The full protection enclosure with manual opening/closing doors ensures total safety during the working phases and maximum ergonomics when entering the machine for set-up and maintenance.
|MACHINING FEATURES||balestrini fox tn|
|balestrini fox plus|
|Workpiece length||min. 200 mm|
|max. 2000 or 3000 mm|
|Workpiece cross-section||Width x thickness||min. 10 x 10 mm|
|max. 120 x 60 mm|
|Tenon dimensions||Length||max. 80 mm|
|Thickness||max. 30 mm|
|Height||6 ÷ 50 mm|
|Hole or mortise dimensions||Hole diameter max.||-||32 mm|
|Mortise length max.||-||80 mm|
|Mortise thickness max.||-||32 mm|
|Hole or mortise depth max.||-||50 mm|
|Cutting angles||Head units rotation||From -22,5° up to 45°|
|Head units tilting||From -20° up to 45°|
|CNC Automatic feeder||Workpiece length min/max.||200/ 2000 or 3000 mm|
|Loadable weight on the loading station max.||20 kg|
|Tool diameter std.||-||10 mm or 3/8"|
|Programming||With macros, through Maestro active joint|
Fill out the online form to be contacted by a salesperson