tecnocut easypump

(512) 931-1962
Waterjet cutting systems - Pressure intensifiers - tecnocut easypump

High pressure intensifier

CMS has developed a new concept of high-pressure intensifiers: two or three parallel, independent and electronically synchronized pressure multipliers, which deliver a constant pressure while eliminating the need of an attenuator, a typical feature of old, traditional intensifiers.

  • highly constant pressure without using any attenuator
  • higher stability of the dynamic pressure signal to guarantee superior quality cut
  • lower wear of all machining centre high-pressure circuit components, longer duration of materials and reduction in maintenance interventions
  • the configuration with three independent cylinders allow to disable any one of them that requires maintenance, thus keeping the intensifier running and avoiding to shut down the cutting system
  • software-based electronic control of cutting pressure
  • hydraulic pump with fixed flow rate
  • hydraulic cylinders return circuit managed by nitrogen accumulators
  • water/Oil exchanger for hydraulic circuit cooling
  • specific for CMS cutting systems.
  • the 60HP model comes with 2 motors (in order to work 30+30 HP)
Advantages

CONSTANT OUTPUT PRESSURE FOR BETTER CUTTING QUALITY

Hydraulic intensifier with 2 or 3 independent and electronically syncronized parallel cylinders to guarantee a constant signal of output pressure without the use of attenuator.

REDUNDANT ARCHITECTURE: LESS MACHINE DOWNTIME

The technology with 3 independent cylinders allows the bypass of a single cylinder that needs maintenance, while the machine is working, avoiding unnecessary downtime.

LESS MAINTENANCE COSTS

The parallel cylinders architecture is designed for a low cycle frequency that reduce the high pressure components wear and consequently the maintenance costs.

"NOISELESS" SYSTEM FOR A QUIET ENVIRONMENT

Sealed cover with soundproof panels to guarantee high noise reduction while the intensifier is working.

Technical data
TECNICAL DATA
  Tecnocut Easypump 30 Hp Tecnocut Easypump 60 Hp
Power 22,5/30 kW/Hp 45/60 kW/Hp
Cylinders 2 3
Max water pressure 4150/60.000 bar/psi 4150/60.000 bar/ps
Max water flow rate 2.5/0.66 lpm/gpm 5.0/1.32 lpm/gpm
Max diam orifices 0.28/0.011 mm/in 0.40/0.015 mm/in
Voltage 400V +/- 5% 50-60 Hz (Different voltages and frequencies on request)

 

Media
Documentation
Request information

Fill out the online form to be contacted by a salesperson

Newsletter - sign up to get the latest news

I agree to the Privacy Policy.