Machining centres for making furniture with hardware insertion for small and medium-sized companies.
With up to 2 independent machining heads.
Maximum attention to energy savings on the electric power absorbed at every stage of machining.
HIGH QUALITY OF THE FINISHED PRODUCTS
Careful workpiece handling during machining, using materials and movements that avoid bumps and scrapes that could damage the finish.
MORE COMPACT FOOTPRINT
In just 6 square meters you can work panels longer than 3000mm, making the operator’s job easy with minimum movements so that workpiece loading and unloading are simple.
|Min. length of workpiece machinable||mm||250/300|
|Max. length of workpiece machinable||mm||2700/3200|
|Min./max. width of workpiece machinable||mm||50/1700|
|Min./max. thickness of workpiece machinable||mm||8/80|
|Max. number of operating units (including inserting unit)||n.||6|
|Max. speed of workpiece conveyor belt||m/min||62/92|
|Tool changer time model REVOLVER||sec||1,5 min|
|Max. machining faces||n.||5|
Fill out the online form to be contacted by a salesperson