CMS brought about a new concept in ultrahigh pressure intensifiers, enriched with technological contents especially designed to satisfy the needs of the most demanding users. The original technical conception provided for pressure intensifiers to be equipped with several pressure multipliers: independent, parallel and electronically-synchronized. This innovative solution made it possible to obtain an everconstant pressure levels, avoiding any pressure drops typical of traditional opposed-cylinder intensifiers.
CONSTANT OUTPUT PRESSURE FOR BETTER CUTTING QUALITY
Hydraulic intensifier with 2 or 3 independent and electronically syncronized parallel cylinders to guarantee a constant signal of output pressure without the use of attenuator.
REDUNDANT ARCHITECTURE: LESS MACHINE DOWNTIME
The technology with 3 independent cylinders allows the bypass of a single cylinder that needs maintenance, while the machine is working, avoiding unnecessary downtime.
LESS MAINTENANCE COSTS
The parallel cylinders architecture is designed for a low cycle frequency that reduce the high pressure components wear and consequently the maintenance costs.
|Tecnocut Jetpower evo 30 Hp||Tecnocut Jetpower evo 60 Hp|
|POWER||22,5 kW / 30 Hp||45 kW / 60 Hp|
|MAX WATER PRESSURE||4150 bar / 60.000 psi||4150 bar / 60.000 psi|
|MAX WATER PRESSURE||2,5 lpm / 0,66 gpm||5 lpm / 1,32 gpm|
|MAX DIAMETER ORIFICES||0,28 mm / 0,011 in||0,40 mm / 0,016 in|
|VOLTAGE||400V +/- 5% 50-60 Hz (Different voltages and frequencies on request)|
Fill out the online form to be contacted by a salesperson