MOULDERS, TRADITIONAL MACHINES, PRESSES, CALIBRATING AND VARNISHING MACHINES
These have dedicated software for programming the machine on the basis of the geometry of the component and for optimising the quality of surface finish.

MACHINES IN CELLS: NETLINE
NETLINE is a software for production cells that manages the process of sizing, edging and drilling. Starting from a furnishing project, the executive CAD project supplies the machine with all information necessary for production. The machines automatically recognise the components to be produced and set themselves accordingly. The information can be transmitted by bar code, electronic chip or serial connection.

IN LINE MACHINES: NEXT AND EASYLINE
When the machines are placed in a production line, SCM Group supplies a software that manages the entire process, NEXT for solid wood lines and Easyline for panel lines. Next and Easyline are line supervisors that can receive data on the piece and send them to the managing PC.

AXIS PROCESSES
5 axis processes are a key tool for the marine sector, since they permit all three-dimensional processes dictated by the curved geometries that follow the waterlines of the hull to be carried out.

NESTING
This is an automatic procedure that optimises shaped cuts for flat elements. The geometries of the component are imported from the CAD and interconnected. The result is the production on a single panel of different geometries with calculated minimum wastage. For example, from a single panel and with a single passage, all the various components of a piece of furniture can be obtained. NESTING CELLS are a combination between a machine and part loading and unloading systems that allow processes to be automated and speeded up.