The edge coating system Laccabord is suitable for the application of stains, base coats and top coats on edges of the most various shapes. Thanks to a wide range of application , drying and sanding units installed onto the machine in a specific sequence, the desired lacquering process is performed on the panel edge.
Plus:
- the automation of the edge lacquering process.
- the lacquering onto edges of panels in different size loaded one after the other, without any need of building a homogenous stack.
- the lacquering of edges with the most various shapes
- the use of fast lacquering cycles with UV materials
- relevant reduction of the lacquer waste
- use of the net belt application unit LACCABORD NST, which easily adapts to the various edge shapes.



Websolute